357 Magnum Cleaning Kit with Cable

1. Clean in minutes, no bench required. The 12-inch braided steel pull-through cable rides through your .357 bore with brass-threaded ends and a black T-handle fitted with a brass swivel — fouling and moisture out in one or two passes.

2. Tools matched to your barrel. The .357 bore brush (copper-bronze wire) breaks up carbon, the .357 cotton mop seats solvent and oil, and the brass patch puller handles patch work — a set sized for .357 Magnum revolvers, and it also fits .38 Special barrels.

3. Everything else, already included. Double-ended nylon brush, 6-piece screwdriver bit set (PH1, PH2, slotted 4 & 7, Torx T15 & T20), brass thread adapter (8-32 to 5/16-26), and 25 pre-cut 1.5 x 3 in patches — grips, sights, and screws covered too.

4. Stay organized, stay ready. The olive molded plastic case with transparent lid, hanging hole, and slide latches keeps every piece visible and in place — pegboard, range bag, or workbench.

5. Built where brushes are made right. Our own Ningbo brush factory, 20+ years in the industry (est. 2000) and OEM partner to established US brands — dependable quality with wholesale-friendly supply.

357 Magnum Cleaning Kit with Pull-Through Cable for Revolvers

Everything You Need to Clean Your 357 Magnum Revolver in One Case

Revolver cleaning only gets complicated when the tools don't match the gun. This 357 Magnum cleaning kit removes that problem: a pull-through cable, a .357 bore brush, mop, brass patch puller and 25 cleaning patches in a compact case that fits a range bag or gun safe — plus a 6-piece screwdriver bit set and a double-ended nylon brush for grips, sights, and screws. Open the box, and every step of a proper clean is already laid out.

.357 Cal Bore Brush and Mop for Revolver Barrels

The .357 caliber bore brush (copper-bronze wire) and cotton mop are sized for revolver barrels, lifting powder fouling from chamber and bore without scoring the rifling. Every bore-contact part in this Handgun Cleaning Kit for 357 Cal is chosen with the bore in mind: copper-bronze wire is softer than barrel steel, the cotton mop seats solvent and oil without abrasion, and the machined brass patch puller handles patch work — matched with a double-ended nylon brush (large and small heads) for exterior and tight-space cleaning.

Caliber note: this kit is designed for .357 caliber handgun bores — specifically .357 Magnum revolvers, and it also fits .38 Special barrels (same 0.357 in bullet diameter). The bore brush, cotton mop, and brass patch puller are all sized for .357; the 12-inch cable and nylon brush work across the same bore size. If your barrel is anything other than .357 Magnum / .38 Special, or you are not sure, measure the bore or send us your model before ordering — we will confirm compatibility.

Fig.6 — Alt: Double-ended nylon cleaning brush for 357 Magnum handgun cleaning kit

Pull-Through Cable System, No Rigid Rod Needed

The 12-inch pull-through cable with black T-handle glides through the bore without a rigid rod, making field and range cleaning fast and simple. The cable is braided steel with brass threaded ends, paired with a brass swivel in the handle for a smooth, controlled pull from chamber to muzzle.

Also Fits .38 Special Barrels

Because .38 Special and .357 Magnum share the same bullet diameter (0.357 in), this kit's bore brush, mop, and patches also work on .38 Special revolvers — one kit covers both cartridges the way most .357 owners actually shoot: .38 Special for practice, .357 Magnum for power.

Brass Patch Puller, Adapter and 25 Patches

The brass patch puller holds standard 1.5 x 3 inch patches for a final dry pass, and the brass adapter (8-32 to 5/16-26) connects the cable or accessories to either thread pattern. The 6-piece screwdriver bit set (PH1, PH2, slotted 4 & 7, Torx T15 & T20) covers common grip, sight, and optics-mount screws for hand-tight maintenance — not for heavy torque.

What's in the Box

• 1 × Double-ended cleaning nylon brush (large + small heads)

• 1 × Black T-handle (with brass swivel)

• 1 × Bore brush, .357 cal (copper-bronze wire)

• 1 × Cotton mop, .357 cal

• 1 × Screwdriver bit set — 6 pcs (PH1, PH2, 4, 7, T15, T20)

• 1 × Brass patch puller, .357 cal

• 1 × 12 in (30 cm) braided steel pull-through cable (brass threaded ends)

• 1 × Brass thread adapter, 8-32 to 5/16-26

• 25 × Cleaning patches, 1.5 x 3 in (white)

Fig.7 — Alt: Pull-through cable with black T-handle and 6-piece screwdriver set

How to Use the Pull-Through Cable

Toss it in the range bag: pull the cable through the bore once or twice with a patch attached — carbon and moisture out in seconds, no bench needed.

Park it at the workbench: a bore cleaner with the .357 bore brush first, patches on the brass puller next, then the cotton mop with a light oil coat.

Put it on the shop shelf: the transparent case shows the full set at a glance, and the 6-piece bit set covers grip and sight screws — one box per customer, nothing else to explain.

Always confirm the firearm is unloaded and follow your owner's manual before cleaning.

Factory-Direct from a 20-Year US-Market OEM

Twenty-plus years of gun-cleaning manufacturing, an 8-acre Ningbo plant running since 2004 that turns out up to 600,000 brushes a month, and a production history that includes Remington®, Cabela's®, Bulldog®, and Birchwood Casey® — that is the factory behind every Huntimes kit. The 357 Magnum Cleaning Kit with Cable is manufactured in our own Ningbo brush factory, and we have served as an OEM partner for well-known US brands since 2000. We support private-label branding, custom kit contents, and custom packaging. Send our sales team your target quantity and specifications for a quotation. Our products ship to the United States, the European Union, and Australia, holding the same standard we have kept since 2000. Stock this kit, and you are buying from the people who actually make the brushes, not from a middleman.

Frequently Asked Questions

Q1. Which guns does this kit fit?

A1. This kit is sized for .357 caliber bores — specifically .357 Magnum revolvers, and it also fits .38 Special revolvers (same 0.357 in bullet diameter). The bore brush, cotton mop, and brass patch puller are all .357; the cable and nylon brush work across the same bore size. If you are unsure about your barrel, measure the bore or send us your model before ordering — we will confirm compatibility.

Q2. Are the brass, bronze, and steel parts safe for my barrel?

A2. Yes — brass and bronze are softer than barrel steel, so normal cleaning will not scratch the rifling. The cable rides smoothly through the bore, and the cotton mop applies oil without abrasion. Unload the firearm first, follow the owner's manual, and use a bore cleaner before you brush.

Q3. What are the screwdriver bits for?

A3. The six bits cover common revolver and accessory hardware: PH1 and PH2 Phillips bits for grip screws, slotted bits 4 and 7 for flat-head screws on sights, and T15 and T20 Torx bits for optics-mount fasteners. Use the matching bit by hand for maintenance — these bits are not meant for heavy torque.

Q4. Do you offer OEM/ODM and private-label options?

A4. Absolutely. Since 2000 we have made kits and brushes for established US brands out of our Ningbo plant (est. 2004; 8 acres; 600,000 brushes a month). Private label, custom kit contents, and custom packaging are all available — tell us the quantity and specs, and we will quote.

Q5. How is the kit packaged, and what are wholesale terms?

A5. Every kit leaves in its storage case with everything secured in place. Wholesale orders can be boxed retail-ready, in display cartons, or in bulk master cartons. MOQ and lead time vary with order size and customization — ask our sales team; we ship to the US, EU, and Australia.

Fig.1 — Alt: 357 Magnum cleaning kit in storage case, lid open

Fig.3 — Alt: 357 Magnum cleaning kit with pull-through cable and black T-handle, 3/4 view

Fig.2 — Alt: 357 Magnum cleaning kit contents arranged in case with bore brush and cable

Fig.4 — Alt: Complete 357 Magnum revolver cleaning kit flat lay with bore brush, mop, cable and patches

Fig.5 — Alt: .357 caliber bore brush and mop set for 357 Magnum cleaning kit